ELEEK 600W 7T Direct Drive Electric Motor - is a high-efficiency brushless hub motor (BLDC), designed for those who value reliability, speed, and simplicity of construction. Thanks to the Direct Drive system, the motor has a minimal number of moving parts, ensuring virtually silent operation and an exceptionally long service life.
This model with 7T (High Speed) winding is oriented towards high-speed riding. Compared to high-torque versions, this motor allows for a higher top speed at the same battery voltage. The nominal power of 600W makes it an ideal choice for city e-bikes, while the ability to handle peak loads up to 1200W allows you to confidently tackle inclines and dynamically accelerate in traffic.
The motor supports regeneration (battery charging during braking), which helps save energy and preserve brake pads. The housing is made of a durable aluminum alloy, featuring protection against moisture and dust, and the power cable is equipped with reliable connectors for quick connection.
Technical Specifications
| Parameter | Value |
| Motor type | Hub motor, BLDC (brushless) |
| Drive type | Direct Drive |
| Nominal power | 600 W |
| Peak power | 1200 W |
| Turns (Winding) | 7T (High Speed) |
| Axle | 10 mm (slotted for dropouts) |
| Nominal voltage | 36V / 48V / 60V |
| Maximum speed | up to 45-50 km/h (depends on voltage and rim diameter) |
| Efficiency | > 85% |
| Dropout width | 135 mm (rear wheel standard) |
| Hall Sensors | Yes |
| Brake compatibility | Disc brake mount (6-bolt) |
| Weight | ~ 5.8 kg |
| Spoke hole count | 36 |
🛠 Expert Review: Why 7T?
When choosing a hub motor, the winding (number of turns) is the determining factor for your bike's character. The 7T (High Speed) configuration has a higher $KV$ (RPM per volt) compared to high-torque models (e.g., 10T or 12T).
-
Speed Potential: This motor allows for high speed performance even at a standard 48V voltage. It is the perfect balance for city riding where keeping pace with traffic is essential.
-
Thermal Management & Reliability: Due to the absence of a planetary gearbox, heat from the stator is dissipated directly to the motor housing, which acts as a massive radiator. This allows the motor to operate stably under a peak load of 1200W without the risk of overheating internal gears.
-
Ride Smoothness: We recommend using this motor with sine-wave controllers. This ensures completely silent operation, no vibrations during start-up, and smooth regenerative braking, which significantly extends brake system life and adds about 5-10% to the range.
💡 Assembly Recommendations:
-
Controller: To unlock the full peak power potential, use a controller with an operating current of at least 25-30A.
-
Dropout Reinforcement: Despite the 10mm axle, due to the high torque of the direct drive and the presence of regeneration, we strongly recommend installing torque arms.
-
Lacing: The best results for durability are shown by 1-cross lacing with specialized reinforced spokes (10G or 12G) in a double eyeleted rim.
Compatible products
